Do you have low water pressure? Mornings can be difficult when trying to rinse your hair under a showerhead that barely produces a trickle. Low water pressure can be caused by various factors, some of which are exclusive to the room and others that affect the entire house.

Unfortunately, you may not know how much you rely on water to complete various jobs until you have a water supply problem.

In the worst-case scenario, you may be without water for an extended period. This blog post dives into what is happening when your pressure suddenly drops, why this happens, and how to fix small problems like this.

The 5 Most Common Causes of Water Pressure Problems

If you live in an area where the water pressure is low, it can be difficult to shower, wash your dishes, and use the bathroom. Decrease in pressure is also a common problem in homes built before the 1960s. Here are the five most common causes of decrease in pressure:

 

  • Failing Pressure Regulator

Pressure regulators keep the water flow from becoming too extreme. If the pressure in your entire house suddenly lowers, it could signify a malfunctioning pressure regulator.

 

  • Leaks

Leaking pipes frequently cause decreased pressure. Leaks in the plumbing redirect water flow, leaving you stranded. Sound or dampness in the vicinity can help you locate a leak.

A plumber may ask you to turn off all of the house’s water faucets and keep track of the water meter. If it reveals increased usage a few hours later, you probably have a slab leak.

 

  • Closed Valves

A water meter valve and the main shutoff valve are found in most residences. One of these valves may be closed or partially closed if you experience backflow pressure throughout the house.

 

  • Aging Infrastructure

Older pipes and pumps can often lose water pressure over time due to corrosion and wear. In some cases, this can be due to natural corrosion in underground water supplies.

If you’re having a hard time with your pressure, it might be worth investing in a water softener or filtration system to help restore lost pressure.

 

  • Low water tank capacity

If your house or apartment is built on a large plot of land with limited water resources, your municipality may have restricted how much water your property can use.

In some cases, this may also be due to environmental concerns – like contaminating local groundwater supplies by wastewater runoff – which may lead to higher water bills for homeowners.

If Your Home Utilizes a Pressure Regulator Check That It’s Fully Operational

A pressure regulator is put immediately after the main shutoff valve in specific homes in areas with greater than normal pressure to guarantee that the plumbing fixtures and pipes within the residence are not damaged by excessively high water pressure.

 

Additionally, the pressure that exceeds the standard PSI for a residential residence puts undue strain on the water system’s fixtures and valves, causing them to burst and causing major water damage if not contained.

 

In addition, if your home has a regulator, your backflow pressure could be caused by the regulator’s current setting or a damaged regulator, resulting in higher or lower water pressure than usual.

Some Ways to Fix Low Water Pressure

  • Fix the leaks in your plumbing

Once you’ve discovered a leak, you can clean and seal it yourself. More severe leaks may require replacements and the intervention of a professional plumber

 

  • Open Valves

The main shutoff valve is usually situated on an outside wall or in utility areas like the basement, laundry room, or garage.

A gate valve looks like a wheel; turn it counterclockwise to open it.  In addition, as with a water meter valve, make sure the lever is parallel to the pipe when opening a ball valve.

 

  • Fixing a Broken Pressure Regulator

Sudden, house-wide fluctuations in water pressure are an easy way to spot a broken pressure regulator. Connect a water pressure gauge to an exterior water faucet where a garden hose is connected to confirm any suspicions.

Contact a professional to repair the damaged pressure regulator if the water pressure is below the permissible range of 52 to 75 pounds per square inch. 

Think We Can Help with Your Problem? Contact Custom Plumbing of Arizona

Do you have low water pressure? If you’re tired of dealing with the bad flow, contact Custom Plumbing of Arizona at  602-883-2761. The sooner we address it, the less damage it will cause, and the sooner you’ll have normal water pressure again.

Posted on Categories Residential Plumbing Services, Pumping SystemTags , , Leave a comment on Low Water Pressure? 5 Reasons Why This Is The Case

When your hot water runs out fast, you might be able to find a solution. Here are a few reasons it could be happening.

A hot shower can be both therapeutic and a way to naturally clean yourself. Once hot water runs out, a burst of cold water can shock you. When you’re a busy homeowner, you always want an easy solution for long hot showers.

A variety of factors affect the amount of hot water you have to use, including the type of water heater, size of the tank, temperature of the shower, the rate at which the tank reheats, and flow rate of your showerhead.

Hot water runs out fast for a variety of reasons

In a house, many reasons might be to blame when hot water runs out faster than average, but here are just a few: rusty pipes, power supply problems, sediment,  a blown pilot light, broken dip tubes, etc.

      Deposition of sediment

The sediment building up inside the tank is likely causing your hot water to drop efficiently and last less than it used to. If this change has been gradual, there is a chance you may have sediment build-up.

Over time, dissolved minerals from your water will settle on the bottom of your water heater tank, and the capacity can be reduced. This is due to the accumulation of dissolved minerals and sediment within the water heater.

You may be wondering what the best way to maintain your water heater is if you have a 40-gallon tank with a sediment build-up of 5 gallons and only 35 gallons of water in it currently is.

      Mini Water Heater

If you notice that your water heater is not big enough for your house or needs, it may also be why you are not getting enough hot water. If the heater was installed yourself, this might be the case.

To determine what size is appropriate for your residence, you should consult an expert. It would be best to consider that some tankless systems offer a constant supply of hot water.

      Dip tube broken

A dip tube likely broke if you have been experiencing temperature issues more recently. If this is the case, you should be looking for tiny pieces of plastic that you may find in your shower head, in drain strainers, or even on the screens of your appliance filters to check.

It is likely that the dip tube of your water heater is damaged if you find plastic pieces. To get the water heated up, it is sent to the bottom part of the tank, where it receives the heating. The cold water tends to stay at the top of the pipe when it breaks, but hot water comes out of the bottom instead.

Moreover, because it is not below to be heated, it stays cold for a more extended period. You may wish to contact a professional to confirm that the dip tube needs to be replaced if the problem persists.

      Thermostat not working

A thermostat is not only in your home but also in your water heater. It would be best if you tried to reset your water heater thermostat every time you run out of hot water.

It is worth checking your water heater’s thermostat temperature to see if the temperature is set wrong if the problem persists. If this does not solve the problem, you may need to contact a plumber to ascertain the source of the problem.

       Hot water runs out fast because it’s reheating too slowly

There is a good possibility that you are experiencing problems only when you take unusually long showers or when guests are over. In this case, the problem is probably the recovery time of your water heater.

In the chance of back-to-back showers, the hot water can be drained from the tank, resulting in a long wait until the water is reheated again.

Conclusion to Why Hot Water Runs Out Fast

When your hot water runs out fast, you might be able to find a solution with Custom Plumbing! Think about installing a tankless water heater if you never want to run out of hot water. In addition to ensuring that you always have an unlimited supply of hot water at hand whenever you need it, you will also be able to operate multiple appliances – and even several showers –all at once. Also, tankless water heaters last longer than conventional models and save you more money over time.

Posted on Categories Water Treatment, Boiler Repair, Residential Plumbing ServicesTags Leave a comment on 5 Reasons Your Hot Water Runs Out Fast

What size tankless water heater do I need for my home? If you are thinking of replacing your traditional water heater with a tankless model, this article offers a quick guide to finding the right size.

Investing in a tankless water heater can save you money and ensure you never run out of hot water again. Unlike traditional water heaters, tankless models produce hot water on demand, so you only heat the water that you are going to use. They also have longer lifespans, which helps to justify the higher purchase and installation costs.

Before you get started, however, you need to be sure the unit you are buying is going to be able to keep up with your demand. Depending on how many people live in your home, the number of water sources you want to produce hot water, and some other factors, some tankless water heaters may not be able to meet your needs.

Here’s how to figure out what size your tankless water heater needs to be.

  1. Determine the Number of Hot Water Sources You Need

How many showers and sinks do you have in your home? Do you need hot water for the laundry? The first step in finding the right size for your home is to determine how many hot water sources you want for your home. You should also think about how many sources you want to be able to run at once without losing heat.

  1. Calculate the Flow Rate

The next step is to calculate the flow rate for each of your water sources. The flow rate varies depending on the source—for instance, a kitchen faucet generally produces less water than a shower. Faucets typically produce between one and two gallons per minute, while showers are usually over 2 gallons per minute.

To get an accurate reading, so you don’t accidentally undersize your tankless water heater, you may want to consider running a test on each hot water source in your home using a bucket and stopwatch.

What size tankless water heater do I need? Let us help you get the optimal size for your needs.

  1. Know Your Temperature Rise

Depending on the temperature of the water entering your home, your tankless water heater may have to work harder. In the Phoenix area, the groundwater temperature is between 57-62 degrees. In general, hot water for use in the home is between 105 and 115 degrees. Make sure that your tankless unit can handle the necessary temperature rise before making a purchase or you may end up with a unit that is too small.

Contact Custom Plumbing of Arizona to Learn What Size Is Right for You

What size tankless water heater do I need for my home? We are here to help you determine the best size for your needs. Get in touch with Custom Plumbing of Arizona today so we can start working on a solution.

Posted on Categories BlogTags Leave a comment on What Size Tankless Water Heater Do I Need? A Quick Guide to Sizing

Tankless water heaters have many advantages over traditional models, but is a tankless water heater a good investment for you? This article provides an answer.

Before making changes to your home’s plumbing, you need to know whether any upgrades you decide to implement are going to be worth the money. One of the most common upgrades that homeowners make to their plumbing is trading their traditional water heater for a new tankless system.

Here’s what you need to know before coming to a decision.

 

Is a tankless water heater a good investment?

For many people, upgrading to a tankless water heating system comes with lots of advantages. While they are more expensive than traditional water heaters, tankless systems provide on-demand hot water, are less expensive to operate, and last longer than traditional systems. However, some homeowners may not need the full capabilities of a tankless system if they only have one or two people living in their home.

 

Benefits of Tankless Water Heaters

On-Demand Hot Water

How many times have you had to deal with the fallout from not having enough hot water to go around? If you have a family, you may be left with nothing but ice-cold water in the morning if you are the last to shower. A tankless water heater produces on-demand hot water so you never have to worry about running out of hot water.

 

Energy Savings

Because tankless systems produce hot water only when you need it, they can also save money on your monthly energy bills. Traditional systems have to heat large amounts of water and keep them heated all day so it is ready when you need it. This takes a lot of energy.

 

Longer Lasting Equipment

With an average lifespan of about 18 years, tankless water heaters last almost twice as long as traditional systems, which only last about 10 years on average. Depending on how often you need to replace or repair your system, tankless water heaters could end up being less expensive in the long run.

 

Who might not want a tankless water heater for their home?

Even with all these advantages, tankless systems are not for everyone. The upfront costs are much higher than traditional water heaters, with some models priced at over $1000. When paired with the cost of installation, the price tag is too high for some consumers to even consider upgrading.

 

Ask the Experts at Custom Plumbing of Arizona

Is a tankless water heater a good investment? It depends on your needs and budget. The best way to decide whether upgrading is right for your situation is to talk to someone who knows what they are talking about.

If you are interested in learning more about installing a tankless water heater in your home, get in touch with the experts at Custom Plumbing of Arizona. We will answer whatever questions you may have and guide you in the best choice for your home and budget.

Posted on Categories Residential Plumbing ServicesTags Leave a comment on Why a Tankless Water Heater Is a Good Investment

Wondering whether you need a home water filtration system if you live in Arizona? Read on to learn about a few reasons that your plumbing might benefit from installing one.

Every homeowner must decide whether pollution, outdated municipal treatments, eroding pipes, and other common issues affect their homes’ water. Those in Arizona especially have to think about how hard water affects the taste and quality of their water. To solve these problems, many households make the choice to install a home water filtration system.

If you have been thinking that water filtration might be your best choice but are not quite sure, here are a few reasons you actually do need one.

You Notice a Film Residue after Washing the Dishes, Showering, or Using the Sink

One of the most common plumbing problems that Arizonans (or Arizonians, depending on your preferences) deal with is hard water. A clear sign of hard water? Mineral deposits left behind after water dries. Perhaps you noticed it the last time you did dishes. I know, annoying, right?

But scrubbing mineral deposits from those dishes you already washed is the least of your worries if you have hard water. For instance, did you know that hard water can ruin your clothes, cause damage to your plumbing, and lead to water heater failure? These problems can lead to damage that costs you hundreds or even thousands of dollars. Installing a home water filtration system can prevent the damage from occurring.

You Don’t Like the Taste or Smell of Your Water

Another sign that your water is not being filtered thoroughly enough is a bad taste or odor. While not necessarily a health hazard, foul tasting water is not exactly appealing. One reason that your water might taste bad is because of naturally occurring algae. While the algae itself is filtered out by the city, a nasty taste is often left behind.

With a home water filtration system in place, you will notice a big difference.

You Have Dry Skin or Dull Hair

You don’t have to be a beauty queen to want beautiful, healthy skin. So, why do so many of us put up with dry skin that results from hard water? In fact, anyone who has sensitive skin can also expect rashes and eczema if they continue to shower or wash with hard water.

It’s not only the calcium and other mineral deposits in water that cause damage to hair and skin, either. Chemicals used to make the water safe to drink, like chlorine, are also harsh. All of the above strip the hair and skin of their natural oils, so even if you use expensive soap and shampoo, you can still see problems.

Learn More about Installing a Home Water Filtration System

While these are not the only issues that hard, unfiltered water can cause, they illustrate what you can gain by installing a home filtration system. Are you interested in learning more? Contact Custom Plumbing today to speak to someone on our team.

Posted on Categories Water Treatment, Plumbing Service & Repair Phoenix AZ, Residential Plumbing ServicesTags